Med In Town was founded two years ago to meet a need for the supply of equipment to medical facilities on a just-in-time basis while at the same time complying with the applicable standards and certifications. The starting point is that hospitals and other healthcare facilities have a growing need for equipment that is pre-sterilized ready for immediate use in the operating theater. A transfer of responsibility takes place between the supplier and the facility, to ensure compliance with the supply standards of the equipment, which is often produced remotely, up until its entry into the theater and its use by the medical personnel.
To respond in particular to the issues of increasing needs during the Covid period, while maintaining standards, Med In Town looked closely at the criterion of proximity to the production site. After considering setting up directly in hospital centers, the company finally came up with a more mobile solution, namely a mobile additive manufacturing unit, fully contained within a shipping container that can be moved from one facility to the next according to requirements.
By direct movement of the MicroFactory within hospital centers, Med In Town provides production that is quick, qualified and matched to needs. It also means that resources can be pooled by two or more different facilities. A first MicroFactory was created at the end of 2021. Production capacities can be adapted dependent on requirements (swabs, surgical kit, etc.) always while adhering strictly to quality standards (ISO, European and FDA standards) and always in partnership with legal manufacturers.
By proposing to other companies that they “construct” their own mobile production unit, Med In Town is opening up for different sectors of activity. Where industry is concerned, Med In Town is a direct representation of the micro-production technological revolution. The need for externalized factories and mass production is obviated, thus doing away with additional costs due to transport. With a mobile production unit, the sector can produce directly, as close as possible to where requirements arise, and especially in conditions that are a lot more sustainable and responsible for the environment; in this way additive manufacturing reduces production costs to those strictly necessary and operates de facto based on a model that minimizes the use of raw materials.
A mobile production unit contains two Formiga P 110, additive manufacturing machines, a model known for its versatility, precision and robustness, essential criteria in the Saint-Étienne start-up project. In this way, cloud-manufacturing is within arm’s reach from this small space, which makes it possible to move or duplicate dependent on the needs of the healthcare facilities.
The first MicroFactory manufactures disposable instruments made of PA 2200. Components made of this material are characterized by good chemical resistance and can be certified for food contact.
The effort made by EOS in developing the technology and raw materials also allows us to envisage a bright future for other applications. In fact our first MicroFactory is dedicated to the PA2200 and single-use instruments, but thanks to the modular nature of the equipment offered by EOS, the concept can be refined into multiple versions which are equally capable of processing implantable devices and resorbable devices.