Process Data Sheet
EOS StainlessSteel 17-4PH for EOS M 300-4 | 40 µm
EOS M 300-4 - 40 µm - TRL 3
| System Setup | EOS M 300-4 |
|---|---|
| EOS Material set | 17-4PH_040_CoreM304 |
| Software Requirements |
EOSPRINT 2.11 or newer |
| Recoater Blade | Ceramic |
| Build Platform Temperature | 80 °C |
| Inert gas | Argon |
| Sieve | 75 µm |
| Additional Information | |
|---|---|
| Layer Thickness | 40 µm |
| Volume Rate | up to 4 x 3.32 mm³/s |
Microstructure of the Produced Parts
| Defects | Thickness | Result | Number of Samples |
|---|---|---|---|
| Average Defect Percentage | - | 0.014 % | - |
Mechanical Properties
Mechanical Properties As Manufactured
| EN ISO 6892-1 Room Temperature | | Yield Strength [MPa] | Tensile Strength [MPa] | Elongation at Break [%] | Reduction of Area Z [%] | Modulus of elasticity [GPa] | Number of Samples |
|---|---|---|---|---|---|---|
| Vertical | 947 | 1052 | 15.7 | - | - | - |
| Horizontal | 941 | 1015 | 16.8 | - | - | - |
Mechanical Properties Heat Treated
| EN ISO 6892-1 Room Temperature | | Yield Strength [MPa] | Tensile Strength [MPa] | Elongation at Break [%] | Reduction of Area Z [%] | Modulus of elasticity [GPa] | Number of Samples |
|---|---|---|---|---|---|---|
| Vertical | 1240 | 1371 | 10.5 | - | - | - |
| Horizontal | 1207 | 1349 | 10.7 | - | - | - |