Kv schmal

EuroMold 2013: New plastic system EOS P 396 reduces secondary processing times by up to 60 percent

Significantly reduced costs per job, increased production efficiency, greater process stability and construction capacity, all with consistent component characteristics

EOS P 396 plastic system for Additive Manufacturing, source: EOS GmbH
Frankfurt/Germany, December 3, 2013 – EOS, the German market and technology leader for design-driven, integrated e-Manufacturing solutions for Additive Manufacturing (AM) is introducing the EOS P 396 production system for the manufacture of plastic parts at this year's Euromold (hall 11, stand E148). The successor model to the successful EOSINT P 395 that is already established in the market offers a multiplicity of features that comprehensively meet the growing demand for increased manufacturing efficiency, process stability, and building capacity. The latest CO2-laser generation max. 70W (50W used) before (max 50W) and a completely revised temperature regulation enable double-digit increases in productivity. In addition, the new EOSAME feature ensures eproducible part quality throughout the complete building chamber, even at the highest fill levels. Global distribution of the EOS P 396 begins in April 2014.

“With the presentation of the EOS P 396 at Euromold we are sustaining a leading role in plastics based Additive Manufacturing, a position that stands alongside our metal technology. The EOS P 396 seamlessly supersedes our highly successful EOSINT P 395 model in the mid-frame segment. We have made a number of improvements that allow our customers to produce both plastic prototypes and serial parts with an even higher quality and cost efficiency,” explains Adrian Keppler, Managing Director at EOS.

Reducing production costs and timeframes
With the unveiling of the new EOS P 396 the company has introduced a number of improvements. Dependent on the fill level and spectrum of parts, potential increases in manufacturing efficiency of up to 30 percent are possible. A reduction of the secondary processing times is achieved by a number of features, including a new point pyrometer and a low wearing, high speed recoater. Primary processing times are shortened thanks to the introduction of a new and significantly higher performance laser. The energy and material consumption of the system per manufactured component also has been further improved. This results in a reduction in operations costs and in an optimized product carbon footprint (per part). When the system is viewed in combination with highly economical materials such as PrimePart® PLUS, then combined cost savings of some 30percent per part are achievable in relation to the system's predecessor.


Continual improvement of component quality

A central contributor to the further optimization of the component characteristics is delivered by the already mentioned EOSAME feature, which regulates the energy input. The mechanicial characteristics of the components are thereby homogenized, so that the quality of the part remains the same independent from the positioning in the construction chamber.

A newly integrated point pyrometer continually measures the temperature of the powder surface for coating with a high degree of precision. This enables secondary processing times to be further reduced leading to a corresponding increase in productivity. Furthermore, this feature forms the basis for a more stable regulation of the production process, thereby improving process reliability. With the availability of Release 3.7 of the EOS process- software (PSW) at the start of series production, the functional scope is once again expanded, and furthermore the Windows 7 operating system supported. The building capacity of the EOS P 396 is in line with that of its predecessor, at 340x340x600mm.

With the introduction of the EOS P 396, the plastic materials PA 2200 and PrimePart® PLUS (PA 2221) will also be commercially available for this system from April 2014. Further materials will follow over several stages, until all of the powders approved for the predecessor system are available.


About EOS

Founded in 1989 and headquartered in Germany, EOS is the technology and market leader for design-driven, integrated e-Manufacturing solutions for Additive manufacturing (AM), an industrial 3D printing process. EOS offers a modular solution portfolio including systems, software, materials and material development as well as services (maintenance, training, specific application consulting). As an industrial manufacturing process it allows the fast and flexible production of high-end parts based on 3D CAD data at a repeatable industry level of quality. As a disruptive technology it paves the way for a paradigm shift in product design and manufacturing. It accelerates product development, offers freedom of design, enables the optimization of part structures, lattice structures as well as functional integration. As such, it creates significant competitive advantages for its customers. For more information please visit www.eos.info.

Downloads

 

Claudia Jordan
EOS GmbH
Electro Optical Systems
Claudia Jordan
Robert-Stirling-Ring 1
82152 Krailling/Munich
Phone +49 89 893 36 2134
claudia.jordan@eos.info