EOS P 810 - High-temperature polymer laser sintering solution for serial production of demanding composite components

EOS P 810 & HT-23: The perfect solution for demanding high-performance applications

EOS P 810 (source: EOS)
EOS P 810 (source: EOS)
With a building volume of 700 x 380 x 380 mm, EOS P 810 enables a fast and cost efficient production of plastic parts directly from CAD data. Parts made out of HT-23 material offer high strength at low weight and withstand high temperatures.

Efficiency

Thanks to improved recoating speed, fast digital scanners and high-power lasers the building time is significantly reduced and thus productivity increased.

Quality

HT-23 a Polyetherketoneketone (PEKK) material with encapsulated carbon fiber reinforcement is inherently flame retardant, UV resistant and meets regulations of the aerospace (FAR 25.853) and mobility industry (EN 45545).

Sustainability

With a low refresh rate (60% recyclable, little excess powder) HT-23 is contributing to substantially reduce cost-per-part.


Technical data

EOS P 810

Building volume

700 mm x 380 mm x 380 mm (27.6 x 15 x 15 in)

Laser type CO2, 2 x 70 W
Building rate

up to 10 mm/h (0.4 in/h); up to 2,7l/h

Layer thickness: ALM HT-23

120 μm (Other thicknesses technically possible)

Precision optics

F-theta lenses, high-speed scanners

Scan speed during building process

up to 2 x 6 m/s (23 ft./sec)

Power supply

32 A / 400 V

Power consumption typical 3.9 kW; maximum 10 kW

Dimensions (B x T x H)

System 

2,500 mm x 1,300 mm x 2,190 mm

Recommended installation space

min. 4.8 m x 4.8 m x 3.0 m

Weight

approx. 2.300 kg

Software


PSW 3.8 with EOSAME feature, EOSTATE System with Online Laser Power Control, EOSPRINT 2 with SmartScaling feature, EOSCONNECT

Material

HT-23 from Advanced Laser Materials (ALM)

Optional accessories

IPCM P plus, CoolDown Station, Unpacking and Sieving Station, Blasting Cabinet

EOS Perfect Package for EOS P 810

Eos p810 perfect package download eng small

Download

I have taken note of the Privacy Policy and would like to be contacted by EOS GmbH Electro Optical Systems (EOS) under the e-mail address provided above.
I would also like EOS GmbH Electro Optical Systems (EOS) to send me its newsletter as well as individual communications with information on EOS' products and services to the e-mail address provided above.

The foregoing consents may be withdrawn at any time without incurring any cost (other than my communication provider's normal fees). For this purpose I can contact EOS by an e-mail to datenschutz@eos.info or in any other manner.
* Mandatory

EOS P 396

Höhere Produktivität und dadurch niedrigere Kosten pro Baujob. Die verbesserte Hard- und Software sorgen für konstantere Bauteileigenschaften.

Software

EOS-Softwarelösungen unterstützen den kompletten Prozess sowie die Qualitätssicherung der gesamten Fertigungskette

Service

Weltweiter Service für alle Leistungs- und Lebensphasen Ihrer Additiven Fertigungssysteme

Kontakt

Haben Sie Fragen?
Kontaktieren Sie uns.