More Output, Less Post-Processing
Prototal Group Advances Housing Production

5x less

Depowdering

effort for complex parts 

+ 60 %

Part Volume

within 24 hours

154 Liters

Build Volume

optimized for sinlgle-shift prodution

Prototal Group evaluates the next-gerneration polymer platform across demanding housing application

For contract manufacturers, productivity is not determined by build speed alone. What matters is the output of the complete production process. Prototal Group evaluated the next generation of EOS polymer technology across a range of functional housing components. The parts represent a typical contract manufacturing environment, with varying sizes, geometries and functional requirements. This is where two improvements come together: higher output from the machine and less manual effort after the build. “As a contract manufacturer, we look at productivity across the complete process,” explains Markus Schrittwieser, Trends & Innovation at Prototal Group. “If we can increase the output of the machine while reducing the manual work required along the process chain, we can manufacture more with the same team.”

A Softer Powder Cake Reduces Effort After the Build

A key contributor is the new advanced roller recoater. Independent control of roller rotation and recoating speed creates a significantly softer powder cake. In combination with advanced exposure parameters, this means less powder adhesion and makes complex parts easier to unpack and depowder. Resulting in up to five times less depowdering effort for complex components. For functional housings, the benefit becomes particularly tangible. Powder needs to be removed from openings, internal contours and fine features before parts can move to subsequent production steps. Easier depowdering reduces hands-on operator time precisely where increasing machine output could otherwise create additional workload downstream. “The softer powder cake makes a very practical difference. Especially with detailed housings, easier depowdering reduces the hands-on effort after printing and helps us move parts through production more efficiently,” says Markus Schrittwieser.

Innovative software parameters improve process homogeneity and dimensional accuracy in XY and Z for realising complex housings. 

"As a contract manufacturer, we look at productivity across the complete process. If we can increase the output of the machine while reducing the manual work required along the process chain, we can manufacture more with the same team."

Markus Schrittwieser, Trends & Innovation at Prototal Group

Less Post-processing Without Compromising Part Quality

Reducing downstream effort only creates value if the parts still meet their functional requirements. This is where the new process features complement the advanced roller recoater. Advanced exposure parameters adjust energy input according to individual geometry and supports both dimensional accuracy and depowdering. 3D EOSAME compensates for changing thermal conditions to improve dimensional accuracy in XY, while Smart Scaling improves precision in Z. For functional housings, these capabilities become particularly relevant for clean edges, defined openings, internal contours, readable lettering and precisely reproduced functional details. For Prototal Group, the result is an important combination: less effort after printing without compromising the detail and dimensional accuracy required by the application. “Housing parts become demanding as soon as openings, interfaces, internal contours or fine details come into play. What matters to us is achieving those details accurately while keeping the effort after printing as low as possible,” says Markus Schrittwieser.

Still under wraps: EOS’s next-generation polymer production platform will be unveiled at Formnext 2026.

See It First at Formnext

All details will be revealed at Formnext. Whitness the unveiling and attend the official launch of the next chapter of industrial polymer additive manufacturing at formnext on 17 November at 11:00 AM at the EOS booth (Hall 12, Booth D71).

Secure Your Ticket

A More Productive Machine Realizing Efficient Operation

The same principle extends to productivity. The new system generation can process 60% more build volume within 24 hours. The machine is designed around a single-shift production model, with a build volume of 154 liters in 24 hours. This makes the productivity gain particularly relevant for a production environment where operator capacity does not simply increase with machine output. For Prototal Group, the important measure is therefore not only parts per hour. It is output per available workforce.

Higher build capacity puts more parts into production. Easier depowdering limits the additional manual workload created downstream. Together, both effects make it possible to increase output without scaling the workforce at the same rate. “The single-shift concept fits very well with the way we organize production. The real potential is being able to generate more output within the same operating model, without having to increase personnel in line with machine capacity,” explains Markus Schrittwieser.

A 154 liter build volume optimized for single-shift production

The single-shift concept fits very well with the way we organize production. The real potential is being able to generate more output within the same operating model, without having to increase personnel in line with machine capacity

Markus Schrittwieser, Trends & Innovation at Prototal Group

 

Turning process efficiency into a competitive advantage

For Prototal Group, the housing applications demonstrate how two sides of production efficiency can work together: increasing what the machine produces while reducing the effort required around the part. That changes the economics of scaling. For contract manufacturers, growing customer demand does not necessarily have to translate into proportionally more operational complexity. The underlying system strategy is similarly focused on spending less time managing the machine and scaling production without scaling operational complexity at the same rate. As additive manufacturing moves toward higher output and more demanding applications, this can become an important competitive advantage for contract manufacturers that want to grow within their existing production organization. More build volume. Less post-processing. More output with the same workforce.

Markus Schrittwieser, Head of Trends & Innovation at 1zu1, extensively tested the next-generation EOS polymer platform for demanding applications in production.

Results at a Glance:

  • Up to 5x less depowdering effort for complex parts

  • Innovative software parameters improve process homogeneity and dimensional accuracy in XY and Z

  • 60 % more part volume within 24 hours

  • 154 L build volume optimized for single-shift production

Short Company Profile Prototal Group

Prototal Group is a one-stop shop for plastic or metal part production. They support companies across the entire product lifecycle — from the first prototype to full-scale serial production. Since 1999, they have been the preferred manufacturing partner for some of Europes biggest brands. With a strong focus on ESG combined with strategic partnerships with leading OEMs, they are reshaping the manufacturing as-a-service market with advanced manufacturing solutions that gives customer a competitive advantage.

Further Information: https://prototalgroup.com